|Max Pressure||6000 PSI|
|Max Temperature of Media||250 deg C|
|Input Port||1/2 inch NPT Female|
|Output Port||1/2 inch NPT Female|
Made in stainless steel and carbon steel with various NB pipes of Sch 40/80/160.
Material Of Construction
Pipe Size &Schedule
Thread Size &Connection
2’’ SCH 40
2’’ SCH 80
2’’ SCH 160
3’’ SCH 40
3’’ SCH 80
3’’ SCH 160
4’’ SCH 40
4’’ SCH 80
4’’ SCH 160
6’’ SCH 40
6’’ SCH 80
6’’ SCH 160
|Inlet Diameter||12-16 mm|
|Unit Pipe Length||3 meter|
Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure "Tappings", mostly on 2 sides, directly opposite each other, are machined into the orifice flange. This makes separate orifice carriers or tappings in the pipe wall unnecessary.
Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining.
The image on the right shows a set Orifice Flanges, where a Orifice Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges for inspection or replacement of the Orifice Plate and gaskets.
The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2" NPT tappings in each flange.
ASME B16.36 covers Dimensions and dimensional tolerances from orifice flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following flanges.