|Type of PH Meter||Table-Top|
|Temperature Tested||5-55 deg C|
|Output Current||4-20 mA|
Our TX2000 is an intelligent transmitter/controller for reading pH and ORP sensors and programmable process control. The large LCD display shows pH/ORP value simultaneously with temperature. Compatible with all Sensorex combination-style pH and ORP sensors. Versatile mounting options for panel or wall mounting.
|Measure Range||0 to 2000 ppm|
|No of Digits||4|
|Isolated||0.4 to 20 mA|
This article is temporarily no longer available on our site.
Remember to check our similar offers.
The Liquisys CLM223 is a standard transmitter for all analog conductivity sensors. It improves your operational safety thanks to continuous checks of the plausibility, the process and the sensor. Wide choice of hardware and software modules (relay or fieldbus communication) for a perfect adaptation to your measurement task. This modularity also makes it possible to upgrade the transmitter. Simple and fast configuration thanks to simple menu and calibration.
Conductivity Conductive measurement principle
Application Water, wastewater, process
Characteristic 4-wire transmitter with 2-line display
Product description:Yokogawa has implemented three leading process Fieldbus technologies in their 202 series: HART, Foundation Fieldbus H1 and Profibus PA. All transmitters are provided with the important and widely used Device Description files that provide information on parameters and other data in each device, as well as the ability to include algorithmic relationships such as calibrations.
|Measurement Range||0.00-20.00 ppm|
|Temperature Range||0-50 deg C|
|Environmental Temperature||-10 to +45 deg C|
|Current Output||4-20 mA|
|Voltage||230 V AC|
Graphic touch display [multilanguage] 240 x 128 PixelDisplay of measured valuesBargraphsFunction keysSetting up of limit and alarm values.