Vortex Flowmeters

Product Details:

• Max. measurement error

  Volume flow (liquid): ±0.75 %
  Volume flow (optional): ±0.65 %
  Volume flow (steam, gas): ±1.00 %
  Mass flow (saturated steam): ±1.7% (temperature compensated); ±1.5% (temperature/pressure compensated)
  Mass flow (superheated steam, gas): ±1.5 (temperature/pressure compensated); ±1.7% (temperature compensated + external pressure compensation)
  Mass flow (liquid): ±0.85%

Product Details:

Introduction
          
 Vortex Flowmeter is based on Carmen Vortex Principle, which adopts piezoelectric crystal as testing 

components. It is a new kind of stress detecting vortex flowmeter. It has the advantages of wide range  rate, 

high accuracy, low pressure loss, good medium generality, pulse signal output proportional to flow, conveni

ent to connect with computer etc.

Vortex Flow Meters are suitable for a variety of applications in liquid, gas, air, and steam flows. These volumetric flow measuring devices are constructed with stainless steel bodies which provide accurate and reliable measurement for years in industrial service.

Where to Use Vortex Flow Meters

• Measurement of steam - saturated steam in power plants and chemical facilities.
• Gas flow measurement - natural gas, ammonia, nitrogen, carbon dioxide, methane, methane chloride.
• Demineralized and pure water in biotech, semiconductor, and pharmaceutical.
• Air flow measurement - dust control and compressed air consumption.
• Oil and crude methanol up to 100 centipoises.
•  HVAC
• Food processing

Gas: air,oxygen,carbon dioxide,nitrogen,natural gas,lpg,biogas,etc

Liquid: water,oil,etc

Steam:saturated steam and superheated steam,vapor etc

Additional Information:

• Delivery Time: As per available
• Packaging Details: STANDARD

Product Details:

Flow Meter Accuracy

± 0.65% of volumetric rate for liquids
± 1% of volumetric rate for gas and steam
± 0.70% of mass flow rate in water using MultiVariable option
± 2% of mass flow in steam using MultiVariable optio

Turndown: 

38:1

Output

4-20 mA with HART® 5 or 7
4-20 mA with HART® 5 or 7 and Scalable Pulse Output
FOUNDATION; fieldbus ITK6 with 2 Analog Input blocks, 1 Backup Link Active Scheduler function block, and 1 Integrator function block (1 PID function blo

Wetted Material

Stainless Steel – 316/316L and CF3M
Nickel Alloy – C-22 and CW2M
High Temp Carbon Steel – A105 and WCB
Low Temp Carbon Steel – LF2 and LCC
Duplex UNS S32760 and 6A
Consult factory for other wetted material

Flange Options

ANSI Class 150 to 1500
DIN PN 10 to PN 160
JIS 10K to 40K
Flanges are available in a variety of facings
Consult factory for additional flange ratings

Operating Temperatures

-330°F to 842°F (-200°C to 450°C)

Line Size

Flanged: ½-in to 12-in (15 to 300 mm)
Wafer: ½-in to 8-in (15 to 200 mm)
Dual: ½-in to 12-in (15 to 300 mm)
Reducer: 1-in to 14-in (25 to 350 mm)