Product Details:
Application Media | Any Liquid |
Material | Stainless Steel |
Model Name/Number | ISHAN |
Brand | ISHAN |
Usage/Application | ETP |
Connection | 1 inch |
Display | Digital |
Flow Range | 0 m3/hr to 2000 m3/hr |
Accuracy | 0.5 % |
Application area
1. Drinking water supply, water supply, reservoir and pumping station etc.
2. Chemical acid, lye, conductive solution, cooling fluid, additives etc.
3. Drink water, beer, wine, alcohol, milk, yogurt, fruit juice, syrup, blood etc.
4. Refrigeration / air conditioning and refrigeration thermal measurement, or heat energy.
5. Sewage, industrial sewage discharge, sewage etc.
6.Control of metal industrial pump,cooling water and the flow of water.
7. The textile industry of water, pigments, chemicals, bleaching chemicals etc.
Product Details:
Application Media | Water |
Material | C.S |
Model Name/Number | ABB |
Brand | FEP |
Usage/Application | ETP |
Type | Electromagnetic |
Display | Digital |
1.1 Real-time Diagnostic keep your process up and running
- Detecting critical process conditions at an early stage reduce unscheduled downtime and maintenance
- Clear text messages simplify troubleshooting
1.2 In-built Noise/Grounding Check
- Verify the installation is correct from day one
- Checks for proper grounding which is fundamental to an accurate flow measurement
1.3 In-built Verification for highest confidence in your flow measurement
- Checking for sensor and transmitter integrity
- No need to remove the flowmeter from the process
1.4 Best in class filtering technology
- For a most stable flow signal
- Helping to operate your process at peak level performance
1.5 Simplicity of Operation
- Automatic self-configuration sequence
-Incredibly easy to work with
1.6 Backwards Compatibility
- Saves your investment in ABB flowmetering
Product Details:
Material | Stainless Steel |
Brand | Fuji |
Flow Media Type | Water |
Flow Range | 1 m3/ hr to 2000 m3/hr |
Application Media | Water flow mesaured |
Display | Digital |
Size | 40 mm to 1500 mm |
The clamp on ultrasonic water meter is battery powered ultrasonic water meter and developed from transit time clamp on ultrasonic flow meters and used for water flow measurement.Because ultrasonic water meter carries on many good features from ultrasonic flow meter,such as no moving parts,no pressure drop,versatile communication protocol,etc, meanwhile with IP68 protection class, the clamp on ultrasonic water meter will be a better choice for non-invasive water flow test.
Clamp on ultrasonic water meter mainly has two parts: one is clamp on transducers,the other is main electronic converter. The clamp on sensors are IP68 class and the main electronic part is housed in a IP68 metal enclosure. Both of them is connected by special cable. Clamp on transducers are installed outside of the pipe and don’t need to cut pipe, thus, there is no pressure drop,no risk of leakage,no maintainance,etc.
Technical Specification:
1.Pipe size: DN40-DN800mm
2. Accuracy: +/-5% of flow reading
3. Fluid temperature: 0-150 Deg.C.
4. Battery: 3.6v 19AH built-in battery can work for 3-4 years. DC8-36V optional.
5. Communication port: RS485/USART
6.Output way: OCT/TTL pulse, 4-20mA(External DC powered needed)
7. Communication protocol: Standard Modbus and M-Bus
8.Protection class: IP65, IP68 optional
9. Working temperature: -10-70 Deg.C.
10.Display: 96 Segmantal LCD
11.Keypad and operation: local keys for windows browsing, RS485 remote keypad for setting, free setting software is available,too.
12. Max working pressure: Determined by pipe
Product Details:
Brand | Endress Hauser |
Application Media | Water |
Display | Digital |
Flow Range | 2 m3/hr to 500 m3/hr |
Power Supply | 24 VDC |
Accuracy | 0.5 % |
Power Input | 24 VDC |
Country of Origin | Made in India |
The measuring method of our open channel flow meter is to use the ultrasonic level measurement technology combined with the flume or weir , which includes a non-contact ultrasonic level sensor by measuring the height or head of the liquid as it passes over an obstruction (a flume or weir) in the channel. And a specially designed channel shapes flume or weir. The sensor will transmit the pulse to the surface of the monitored material , then will receive the echo back. By measuring the time from transmission of an ultrasonic pulse to receipt of an echo, the liquid level could be accurately measured .
Once a weir or flume was installed , and the ultrasonic level sensor is mounted on the top of the flume or weir for measuring the level. Then the flow of the liquid could be calculated accordingly by an equation. There are some types of weir : V-Notch; Rectangular; and Trapezoidal. The equation is associated with each types of weirs or flumes.
Advantages:
♦ Simple to determine flow with proper equations
♦ Long operational life
♦ Easy "out of water" sensor maintenance
♦ Tried and tested technology
♦ Suitable for hazardous areas
♦ Suitable for waste water, debris laden water and also corrosive media
♦ No moving or delicate parts in the flow it ‘self
♦ Self-cleaning (flumes)
Disadvantages:
♦ Devices must be installed in the flow stream in a location where there is no disruption of steady flow by upstream or downstream blockages
♦ Require consistent flow profiles
♦ Installation costs and ongoing maintenance of primary devices
♦ Specific constraints on pipe/channel sizes and grades
♦ The original shape of primary devices is subject to wear/erosion/damage causing potential measurement inaccuracies over time
♦ Sedimentation, dirt, and other debris can sometimes accumulate on the bottom of these devices, affecting level measurement accuracy
Typical applications:
♦ Permanent and portable sewer monitoring programs
♦ Wastewater treatment plants
♦ Industrial process measurement
♦ Irrigation channels
♦ Effluent flow measurement
♦ Spill monitoring
♦ Combined Sewer Overflows (CSO)
♦ Sanitary Sewer Overflows (SSO)
♦ Event Duration Monitoring (EDM)
Product Details:
Brand | Greyline |
Application Media | Water |
Material | Plastic Body |
Power Supply | 24 VDC |
Color | Grey |
Accuracy | 1 % |
Min.: 0 bar (0 psi)
Max.: 0.69 bar
Process temperatureMin.: -20 °C (-4 °F)
Max.: 60 °C (140 °F)
Product Details:
Brand | ISHAN |
Flow Media Type | Water |
Flow Range | 1 m3/ hr to 2000 m3/hr |
Application Media | Water flow mesaured |
Display | Digital |
Color | Grey |
No moving parts, no pressure drop, no maintenance.
* Spool-piece transducer for best accuracy and better long-term stability.
* High temp. Insertion transducers are suitable for high temperature of -35 150
* Wide bi-directional Flow range of 0.03 to 36 m/s, and wide range of pipe sizes from DN65 to DN6000.
* Data logger function.
* The heat measurement function by configuring with paired temperature sensors.
Technical Parameters :-
Accuracy : Better than ±1.0 %
Power Supply : AC 85-264V,DC 8-36VDC
Repeatability : 0.2%
Power Consumption : Less than 1.5W
Measurement Period : 0.5S
Environment Temperature : -30°C~80°C
Measurement Principle : Transit-time measurement principle
Environment Humidity : 85% RH
Display : LCD with backlight. 2x20 letters.
Protection Class : IP65
Output : RS485,4-20mA or 0-20mA active output,OCT output
Temperature : -40°C~160°C
Input : 4-20mA input optional
Product Details:
Brand | NILKANTH |
Application Media | STEAM |
Material | M.S |
Display | Digital |
Model Name/Number | NIL-STEMA -105 |
Accuracy | 1% to 1.5 % |
Power Supply | 24 VDC |
NIL is a kind of throttling device which possesses advantages of simple structure ,and good
performance The design ,manufacturing and applicationare all in conformity with the stipulations
of international standards ISO5167-1991 or national standards GB/T2624-93. NIL orific-plate
flowmeter can be used to measure volumetric flow of the stable one-orientation medium in the
closed pipes coupled with differential pressure transmitter and relative flow display instrument It
is widely used in petroleum, chemical, metallurgy, power, Environment protection.
NIL orifice-plate flowmeter Main technical Data | |||
Nominal Bore: | DN25 ~ DN1000mm | ||
Nominal Pressure : | Nominal Pressure :0.6 ~ 32MPa | ||
Medium Temperature : | -20 ~ 530??? | ||
Accuracy : | ±0.5% ~ ±1.5% |
Features
1) The construction is simple ,fastness and easy to install .
2) Pressure tapping mode : Angle joint or flange mode
3) Widely used ,working reliably ,performing stably.
4) Temperature ,feildbus communication mode and pressure compensation can be obtained if
coupled with a intelligent differential pressure transmitter
Product Details:
Brand | NILKANTH |
Application Media | STEAM |
Material | Stainless Steel |
Model Name/Number | NIL-GAS-106 |
Display | Digital |
Line Sizes | 25 mm to 1000 mm |
Usage/Application | Automotive |
Material | Stainless Steel |
Display | Digital |
Packaging Type | Standard |
Accuracy | +-0.2 % |
Country of Origin | Made in India |
Minimum Order Quantity | 1 Piece |
We are successfully meeting the varied needs of our patrons by offering a wide gamut of Orifice Type Steam Flow Meter as per their precise needs.
Product Description:
LGU-JH clamp type annular orifice plate Clamping type annular orifice plate is combined with the technical advantages of the circular orifice and the target type flow meter. Is a new developed low cost, good accuracy and long stability throttling device. it has the above advantages and can replace the segment orifice plate and eccentric orifice don't need a long straight pipe and has simple structure, apply to big diameter piping flow measurement such mixed furnace gas, flue gas and hot air heating furnace flow when the performance is more outstanding.
Structure Features:
Ring groove flow sensor's throttle body is like a spindle, installed along the measuring pipe center. Perfect streamline, can completely avoid the flow separation, and minimizes the resistance to flow. high pressure hole set at pipe wall of Ring groove flow sensor spindle head, low pressure hole set at middle-rear part of annular groove way.
Product Details:
Application Media | GAS |
Material | Stainless Steel |
Model Name/Number | NIL-107 |
Brand | NILKANTH |
Display | Local |
Line Size | 25mm to 500 mm |
Operating Pressure | 2 bar |
Operating Temperature | Ambient |
Product Details:
Display | Digital |
Brand | ABB |
Application Media | STEAM / GAS / LIQUID |
Material | Stainless Steel |
Temperature | Upto 300 |
Communication | 4-20 mA |
Introduction
Vortex Flowmeter is based on Carmen Vortex Principle, which adopts piezoelectric crystal as testing
components. It is a new kind of stress detecting vortex flowmeter. It has the advantages of wide range rate,
high accuracy, low pressure loss, good medium generality, pulse signal output proportional to flow, conveni
ent to connect with computer etc.
Vortex Flow Meters are suitable for a variety of applications in liquid, gas, air, and steam flows. These volumetric flow measuring devices are constructed with stainless steel bodies which provide accurate and reliable measurement for years in industrial service.
Where to Use Vortex Flow Meters
Gas: air,oxygen,carbon dioxide,nitrogen,natural gas,lpg,biogas,etc
Liquid: water,oil,etc
Steam:saturated steam and superheated steam,vapor etc
Additional Information:
Product Details:
Brand | Micromotion |
Application Media | Any Liquid |
Material | Stainless Steel |
Maximum Working Pressure | upto 40 bar |
Accuracy | 0.25 % |
Ambient Temperature | 30 Deg |
Connection | 6 mm to 100 mm |
Weight | 5-6 kg |
Signal Output | 4-20 mA |
Country of Origin | Made in India |
Highly accurate sensors for mass flow, volume flow, and density measurement in a cleanable compact design
Features
Product Details:
Brand | Endress Hauser |
Application Media | Any Liquid |
Material | Stainless Steel |
Maximum Working Pressure | upto 40 bar |
Accuracy | 0.25 % |
Ambient Temperature | 30 Deg |
Connection | 6 mm to 100 mm |
Signal Output | 4-20 mA |
Product Details:
Brand | NILKANTH |
Application Media | AIR / GAS |
Material | Stainless Steel |
Packaging Type | STANDARD |
Power Supply | 24 VDC |
Accuracy | 1 % |
Frequency | 50 HZ |
Country of Origin | Made in India |
Model | Code | Sensor Pipe Size Range | Mounting Type |
---|---|---|---|
V100 & V110 | 05 | 2" to 6" (50mm to 150mm) | Tube Fitting, V100 (Single Support), V110 (Double Support) |
10 | 6" to 48" (150mm to 1200mm) | ||
V150 | 05 | 2" to 6" (50mm to 150mm) | Spring Lock (no opposite support required) |
10 | 6" to 48" (150mm to 1200mm) | ||
15 | 12" to 60" (300mm to 1500mm) |
Product Details:
Application Media | Water |
Material | Plastic Body |
Brand | NILKANTH |
Model Name/Number | NIL-109 |
Weight | 2 KG |
Display Type | LCD |
Size | 96*96 mm |
Power Source | 230 VAC |
Description |
Specifications |
|||
|
Analog Input |
Pulse Input |
||
Thermocouple: K, E, B, J, N, T, S |
Waveform: Rectangular, Sine and Triangle wave |
|||
Pt100 |
Amplitude: more than 4V |
|||
Current: 0-10mA, 4~20mA |
Frequency: 0~10KHz |
|||
|
Analog Output |
Communication Output |
Switch Output |
Feed Output |
DC 0~10mA |
RS232, RS485, Ethernet |
Relay with hysteresis |
DC24V (load current≤100mA) |
|
DC 4~20mA (loadresistance ≤500Ω) |
Baud rate: 600, 1200, 2400, 4800, 9600bps,8 data bits, 1 stop bit, and 1 start bit |
AC220V/3A; |
DC12V (load current≤200mA) |
|
Accuracy |
0.2%FS±1d or 0.5%FS±1d |
|||
Measuring Range |
-999999~999999 for flow rate and compensation value |
|||
Display |
Backlit 128*64 lattice LCD |
|||
Control/Alarm |
Optional relay upper limit and lower limit control (Alarm) output, LCD and LED output indication; |
|||
|
Through RS232 interface to Serial thermal printer |
|||
|
Totalizer will be remained for more than 20 years after power off |
|||
Password protection for important data |
||||
Operating environment |
Ambient temperature : -20~60ºC; Relative humidity: ≤85%RH, Far from strong corrosive gas |
|||
|
Product Details:
Application Media | Water |
Material | Stainless Steel |
Model Name/Number | 8705 |
Brand | Rosemount |
Usage/Application | ETP |
Connection | Flange end |
Type | Magnetic flow meter |
Display | Digital |
Product Details:
Display | Digital |
Brand | Rosemount |
Application Media | Any Liquid |
Usage/Application | Industrial |
Material | Stainless Steel |
Temperature | 0-150 C |
Model Name/Number | 8800D |
Flow Meter Accuracy
± 0.65% of volumetric rate for liquids
± 1% of volumetric rate for gas and steam
± 0.70% of mass flow rate in water using MultiVariable option
± 2% of mass flow in steam using MultiVariable optio
Turndown:
38:1
Output
4-20 mA with HART® 5 or 7
4-20 mA with HART® 5 or 7 and Scalable Pulse Output
FOUNDATION; fieldbus ITK6 with 2 Analog Input blocks, 1 Backup Link Active Scheduler function block, and 1 Integrator function block (1 PID function blo
Wetted Material
Stainless Steel – 316/316L and CF3M
Nickel Alloy – C-22 and CW2M
High Temp Carbon Steel – A105 and WCB
Low Temp Carbon Steel – LF2 and LCC
Duplex UNS S32760 and 6A
Consult factory for other wetted material
Flange Options
ANSI Class 150 to 1500
DIN PN 10 to PN 160
JIS 10K to 40K
Flanges are available in a variety of facings
Consult factory for additional flange ratings
Operating Temperatures
-330°F to 842°F (-200°C to 450°C)
Line Size
Flanged: ½-in to 12-in (15 to 300 mm)
Wafer: ½-in to 8-in (15 to 200 mm)
Dual: ½-in to 12-in (15 to 300 mm)
Reducer: 1-in to 14-in (25 to 350 mm)
Product Details:
Material | Stainless Steel |
Brand | micromotion |
Application Media | Any Liquid |
Usage/Application | industrial |
Display | Local |
Flow Range | 0-500 m3/hr |
Operating Pressure | 0-10 kg |
Operating Temperature | upto 150 C |
Power Supply | 230 VAC |
Model Name/Number | R100S1 |
Color | blue |
Electronics Enclosure | IP 68 |
Frequency | 50 HZ |
Size | 1 inch |
Maximum Working Pressure | 0-30 kg |
Range | 0-500 m3/hr |
Accuracy | 0.25% |
Connection | 1 inch |
Weight | 5KG |
Model Number | R100S |
Line Size | 1 inch |
Model No | R100S |
Country of Origin | Made in India |
Product Details:
Material | Stainless Steel |
Brand | Fuji |
Flow Media Type | Water |
Application Media | Water flow mesaured |
Display | Digital |
Power Supply | Battery operated |
Country of Origin | Made in India |
Handheld, Portable Water Flow Meter Use in Various Industries for Different Pipe Sizes.
>Principle: Transit-time ultrasonic flow meter
>Accuracy: Accuracy :over 1%-2%;
>Repeatability: over 0.2%
>Display: 4 line x 16 character LCD with backlight
>Dimension: 200*93*33cm: 390g
>Operation: Support 16 key light touch keyboard and the Simulation keyboard software
>Data interface Insulate RS232 serial interface, upgrade the flew meter software by computer,
support the MODBUS, etc.
>Signal Output 1 way OCT output
>Special Cable: Twisted-pair cable, ;Select the RS232 communication.;
Generally, the standard is 5m*2, optional 10m*2
>Pipe Condition: Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass
steel product, liner is allowed.
>Pipe Diameter: DN 15---6000mm (3 Sizes Tranducers)
>Measuring Medium: Water ; Ultra-pure liquids; Solvents and other liquids
Product Details:
Usage/Application | Truck |
Material | Plastic Body |
Application Media | Diesel |
Model Name/Number | NIL-109 |
Brand | ISHAN |
Line Size | 1 inch |
Display | Local |
Material: Aluminum; enginering plastics
Certificate: CE; ISO
MOQ: 1pcs
Packing: 56.5*42*19cm Carton / 6pcs
Payment terms: T/T
Color: classic BLACK diesel flow meter
Accuracy: 0.5%
Flow range: 20-120 lpm
Max pressure: 3.4Mpa
Product Description
Item | OGM-25 | OGM-40 | OGM-50 |
Inlet and Outlet | 25mm | 40mm | 50mm |
Flow range | 20-120lpm | 25-250lpm | 30-300lpm |
Accuracy | +0.5% | +0.5% | +0.5% |
Repeatability | <0.03% | <0.03% | <0.03% |
Max working pressure | 3.4Mpa | 1.8Mpa | 1.8Mpa |
Max viscosity | 1000CPS | 1000CPS | 1000CPS |
Package | 56.5*42*19cm carton / 6pcs / G.W. 14kg / N.W. 12kg | 57*47*19cm carton / 6pcs / G.W. 20kg / N.W. 18kg | 51*26.5*22.5cm carton / 2pcs / G.W. 15kg / N.W. 13kg |
Product Details:
Application Media | Any Liquid |
Usage/Application | WTP |
Material | Stainless Steel |
Display | Remote |
Flow Range | 0-2000 m3/hr |
Operating Pressure | 2 bar |
Line Size | 25-1500 mm |
Product Details:
Model Name/Number | NIL-108 |
Brand | ISHAN |
Output | 4-20 mA |
Material | S.S |
Application Media | Water |
Display | Local |
Operating Temperature | 30 |
Name | LWZ Intelligent Turbine Flow Meter |
Medium | Liquid, Gas |
Accuracy | 0.2, 0.5, 1.0 (liquid); 1.5 (gas) |
Nominal Diameter | DN4 ~ DN40 (thread connection) |
DN4 ~ DN500 (liquid) | |
DN15 ~ DN50 (gas) | |
Nominal Pressure | PN0.6 ~ PN16MPa |
MediumTemperature | ≤120??? |
Ambient Temperature | -25???~60??? |
Power Supply | +24VDC; +12VDC ~ +30VDC; 3.6V Lithium battery |
Display | LCD display |
Output | Pulse ; 4 ~ 20mA; RS485 |
Explosion Proof | Exia II CT4 ~ T6, Exd II BT4 ~ T6 |
Connect | Flange(DN15 ~ DN500), thread(DN4 ~ DN40) |
Flange Material | 304 Stainless steel; Carbon steel |
Body Material | 304Stainless steel |
Product Details:
Brand | NILKANTH |
Application Media | OIL |
Accuracy | 0.5 % |
Usage/Application | Truck |
Material | Stainless Steel |
Line Size | 12 mm to 100 mm |
Operating Pressure | 2 bar |
Display | Digital |
oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro flow meter.
JSN micro flow meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years.
JSN micro flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization
Basic Parameters
Accuracy |
0.2% , 0.5% |
Temperature |
-30~80°C(Max:200C) |
Pressure |
32bar(Max:1000bar) |
Output |
square-wave pulse(hall sensor,3 wires; reed switch,2 wires) |
Supply |
4-26VDC |
Material |
anodized aluminum or SS316L |
Product Details:
Brand | Emerson |
Application Media | AIR |
Material | Stainless Steel |
Model Name/Number | 3051 |
Display | Digital |
Packaging Type | STANDARD |
Color | Blue |
Warranty | 01 Year warranty |
Country of Origin | Made in India |
Main features:
1) Industry leading integrated DP Flowmeters
2) Energy savings
3) Real-time mass and energy flow measurements
4) Flo-tap design of the 485 and 585 allow installation without system shutdown
Specification
Integrated Flowmeter | Rosemount 3051SFA with Measurement Types 1-4 | Rosemount 3051SFA |
Accuracy | •Mass flow up to 0.8% of mass flow rate, 14:1 turndown | •Volumetric flow up to 0.8% of volumetric flow rate, 14:1 turndown |
Repeatability | ± 0.1 % | ± 0.1 % |
Output | •4-20mA signal based on HART® Communication | •4-20mA signal based on HART® Communication |
Long Term Stability | Up to 15-year stability | Up to 15-year stability |
Warranty | Up to 15-year limited warranty | Up to 15-year limited warranty |
Diagnostics | •User-writable process temperature sensor limits | Advanced HART Diagnostic Suite |
Line Size | 2-in. to 8-in. (50 to 200 mm) – Sensor Size 1 | 2-in. to 8-in. (50 to 200 mm) – Sensor Size 1 |
Application
The flowmeter provide improved accuracy while reducing installation costs and hassles. Pak-Lok assembly utilizes the latest patented compression design to firmly secure the Annubar sensor to the opposite wall of the pipe. Flanged assembly can be used with the 485 and 585. Flange-Lok assembly combines the Pak-Lok compression sealing mechanism with a mounting flange for convenient installation with a sing pipe penetration. The Flo-Tap Annubar assembly can be hot-tapped without interrupting process flow. There is no need to shut down your process to install a flowmeter. Combines the Annubar sensor with 405 Compact wafer for simple installation between raised-face flanges.
Product Details:
Model Name/Number | NIL-111 |
Usage/Application | Water |
Tube Body Construction | Stainless Steel |
Float Material | S.S 304 / 316 |
Maximum Temperatures | up to 80 |
Country of Origin | Made in India |
Product Name: | Metal Tube Variable Area Rotameter | After Service: | 18 Months |
---|---|---|---|
Diameter: | DN15~DN200 | Measuring Tube Material: | 316L, 304, 304 Lined With PTFE, Etc |
Medium Temperature: | Standard:-40~+100??? PTFE:-50~100??? High Temperature Type:110~450??? | Connection Form: | Stabndard:DIN2501 Standard Flange |
Range Ratio: | Standard Type: 10:1; Special Type: 20:1 | Protection Grade: | IP65 |
Installation Height: | DN15-DN200:250mm; More Tahn DN80:350mm |
Product Details:
Model Name/Number | NIL-112 |
Usage/Application | Water |
Tube Body Construction | Stainless Steel |
Float Material | S.S 304 / 316 |
Maximum Temperatures | up to 80 Deg |
Country of Origin | Made in India |
Product Name | HART intelligent variable-area metal tube rotameter water flow meter | keyword | metal tube rotameter | Ambient temperature | -20??? to 70??? |
Accuracy class | 1.5 special 1.0 | Pressure loss | 7kPa~70kPa | Temp of measured medium | -40??? to 100??? |
Pressure Rating | DN15-DN200 | Communication | RS485/Modbus/RS232/HART/Profibus | Application | Gasoline Water Treatment Chemical Diesel Fuel |
Product Details:
Usage/Application | Automotive |
Material | C.S |
Application Media | OIL |
Model Name/Number | KENT |
Brand | KENT |
Display | Local |
Product Details:
Brand | ISHAN |
Application Media | Any Liquid |
Usage/Application | Automotive |
Material | Stainless Steel |
Display | Digital |
Flow Range | 5 LPM - 500 LPM |
Operating Pressure | 2 bar |
Packaging Details | Standard |
Product Details:
Brand | NILKANTH |
Application Media | AIR |
Material | Stainless Steel |
Packaging Type | STANDARD |
Power Supply | 230 VAC |
Accuracy | 1 % |
Frequency | 50 HZ |
Country of Origin | Made in India |
Thermal mass flow meters employ the thermal dispersion principle whereby the rate of heat absorbed by a fluid flowing in a pipe or duct is directly proportional to its mass flow. In a typical thermal flow meter gas flowing over a source of heat absorbs the heat and cools the source.
As flow increases, more heat is absorbed by the gas. The amount of heat dissipated from the heat source is proportional to the gas mass flow and its thermal properties. Therefore, measurement of the heat transfer supplies data from which a mass flow rate may be calculated.
Product Details:
Application Media | Any Liquid |
Usage/Application | WTP |
Material | CS |
Packaging Type | STANDARD |
Power Supply | 230 VAC |
Color | Blue |
Accuracy | 0.5 % |
Flow Range | 0-5000 m3/hr |
Frequency | 50 HZ |
Country of Origin | Made in India |
Product Details:
Model Name/Number | NIL-110 |
Brand | NILKANTH |
Usage/Application | Water |
Tube Body Construction | Acrylic |
Float Material | S.S 304 / 316 |
Country of Origin | Made in India |
Descriptions:
This water flow meter is made of plastic, used for testing the instantaneous flow ,liquid. Its measure flow range is 60-600L/H. The flow meter float is made of plastic shell, so it has good resistance to acid and alkali corrosion resistance. It mainly used in chemical, petroleum, light industry, medicine, chemical fertilizer, chemical fiber, food, environmental protection and scientific research departments.
Features:
Specifications:
Material: Plastic
Model: LZS-15
Working Pressure: ≤0.6Mpa
Working temperature: 0-60°C
Accuracy Class: 4%
CONNECT TYPE BSPP/G
Interface specification: DN15