Level Instrument

Product Details:

NILKANTH ENTERPRISE OFFERES non contact type Ultrasonic level Transmitter in Verious brands in Ex stock .

Working principle of ultrasonic level transmitter/indicator

An emitting circuit sends an electrical signal to a transducer that converts it into an ultrasonic signal that propagates through the medium until it bounces off the surface of a liquid or solid. The echo signal travels back until it reaches the transducer again and it is converted into an electrical signal.

By multiplying the time it takes for the signal to propagate by the speed of sound in the medium, the travelled distance is obtained.

• IP66/67 blind aluminium enclosure, with  aluminium cover without display.
• High mechanical resistance.
• CD graphic display module 128×64 dots and keyboard, also installable after the purchase of the version with blind cover.
• It is delivered already calibrated and programmed to indicate a real distance.
• Accessible keyboard to change configuration parameters.

Product Details:

ultrasonic level transmitter expands on the the features list of the USonic with options like dual sensors, relays output, modbus, data logging and additional programs for batch control and multiple tanks.

• Patented SMART GAIN™ circuitry automatically ignores obstructions
• Superior accuracy – 0.15% of measuring range
• 6 programmable relays
• Analogue outputs
• 2 channel input for differential level batch sample activation, pump alternation, data
  logging, and totalization

 Features

• Patented SMART GAIN™ circuitry automatically profiles and ignores tank obstructions
• Superior accuracy – 0.15% of measuring range
• Temperature compensation
• 2-wire HART
• UV Rated display for full sun exposure. No shade required.
• IECEx, intrinsically safe Ex ia IIC
• 300 msec response time
• NEMA 4X / IP66 or IP68
• Measurement in vacuum of -0.7 bar to 3.4 bar positive

HART compatible, ultrasonic level transmitters with premium features in a durable and economical package. Drexelbrook has decades of experience with ultrasonic level measurements and the result is a unique ultrasonic level transmitter that can take on and simplify applications never previously thought possible for the ultrasonic technology. USonic also brings a number of unique features to the market that make using the USonic ultrasonic level transmitter a simple and cost effective solutions for liquids and slurries.

Product Details:

Features

• Accuracies up t0.0375% standard &0.025% Opt.
• Stability up t0.01% of URL per year for ten years
• Automatic static pressure & temperature compensation
• Rangeability up t100:1
• Response times as fast as 90ms
• Multiple local display capabilities
• External zero, span, & configuration capability
• Polarity insensitive electrical connections
• Comprehensive on-board diagnostic capabilities
• Integral Dual Seal design for highest safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
• World class overpressure protection
• Full compliance tSIL 2/3 requirements.
• Modular design characteristics
• Available with 15 year warranty
• Plugged Impulse Line Detection Option
• Dual/Triple Calibration Option (HART & Fieldbus Only)

Product Details:

Nilkanth  Enterprise offers a  vibrating level switch designed for interface detection of solids in liquids stored in steeping tanks. The SP60 provides a contact output indicating a high or low level alarm. Typical applications include sand, plastic pellets and food products submersed in water. 

The constant vibration of the fork tines provides self-cleaning characteristics for products that do not coat or cake. The unique design of the fork and crystal assembly eliminates false level readings. 
FEATURES: Accepts Universal Input Voltage Detects Solids in Water / Liquids Modular & Simple Design Maintenance Free No Calibration Required Self-Cleaning Robust Fork Design with Patented Piezo Crystal Sensing Element FEATURES: Accepts Universal Input Voltage Detects Solids in Water / Liquids Modular & Simple Design Maintenance Free No Calibration Required Self-Cleaning Robust Fork Design with Patented Piezo Crystal Sensing Element.

Product Details:

A hydrostatic level sensor is a submersible pressure transmitter that has a pressure diaphragm where the inner side of the diaphragm is vented to atmospheric pressure through a vent tube in the cable and the outer side is in contact with the liquid and measuring the static pressure of the liquid column above the transmitter. This static pressure is basically caused by the weight of the fluid on top of the transmitter and is used to calculate the level of the liquid.

Product Details:

Product Description

 

WNK8010 liquid leve sensor with high performance diffused silicon piezoresistive pressure sensor as the measuring element,

- With the reliable amplified circuit and precision temperature compensation, to transfer the gauge or absolute pressure of measurement medium to standard voltage or current signal.

- This product comes with compact profile, easy to install, it can measure the level height directly when through into the liquor.

 

 

Applications

Open tank, waste water, fire fighting water tank, reservoir water level, fuel tank and etc.

 

 

Features

• Adopting diffusion silicon oil-filled sensor

• Max measure range up to 200 meters or more

• High Stability, provide 0.1, 0.2, 0.5 accuracy for option

• Factory direct price

 

 

Quick Information

1.High accuracy 0.2%FS;
2.Wide application range 0-0.5~200m H2O;
3.Output 4~20mA, 0~10mA, 0~5V, 1~5V & customization;
4.High overload 150 times;
5.Stability 0.25%FS/Year;
6.Protection class IP68;
7.High cost effective with OEM &ODM

 

 

 

Specifications

 

 

Product Details:

Key Specifications/Special Features:Guided Wave Radar Level Transmitter is the kind of measuring instrument that is based on the principle of time travel.  The radar wave travels at the speed of light, and its running time can be converted into a level signal by the electronic components.  The probe emits high-frequency pulses which spread along the cable, and the pulses are reflected back when they encounter the material surface and received by the receiver inside the meter.  The distance signal is then converted to the level signal.

Product Details:

RF level sensors are the Capacitance level detectors which are sometimes called as admittance level sensors. These sensors make use of radio frequency balanced impedance bridge circuit to find out whether the probe is in touch with the process material whose level is going to be detected. 
RF-Capacitance level switch is appropriate for application in liquid and solid mediums. Design and sensing electric unit makes it suitable for sticky media, large hoppers and storage bins. The switch is easily thread mounted an the tank and is highly reliable in operation.
RF-Capacitance level switch consists of a guard section, upper insulation, main probe and grounding. It consists of a conductive probe which serves as one of the capacitor plate, and the vessel wall which forms the other plate of capacitor since it is also prepared from a conductive material. The isolation between these two plates of capacitor is provided via an insulating process material having low dielectric constant. Now, for measurement purpose, an RF signal is applied between the two capacitor plates which cause a little flow of current from the conductive probe to the vessel wall via process material. The probe works as an antenna to sense the frequency. “When the level in the tank drops and the probe is exposed to the even less conductive vapours, the dielectric constant drops. This causes a drop in the capacitance reading and a minute drop in current flow. This change is detected by the level switch’s internal circuitry and translated into a change in the relay state of the level switch.

 

Application
Liquids, syrups, solids, powder, cement, sugar, flour, power milk, rice, granules, chemical, etc.

Features
Time delay function from 0-30 seconds.
IP 65 Protection.
Easy installation, durable, rugged
Suitable for sticky application, solids, powder
No moving parts

Product Details:

The single Point or multiple reed switch units are housed tightly in SS or PP, and the permanent magnet is sealed into the middle of the specified float ball. The float up and down at the specified position by graduating rings.
When the float internal magnet approaches the reed switch, it will actuate the reed switch contact point to create an open or close circuit.
Sensors are available in SS/PP moc & made in different lengths for single or multiple levels sensing of liquids. SS are used in food grade and high temperature application.

 

Application
Diesel, generator facilities, petrochemical, Condensate, acids, chemical, beverages, milk, juices, oil, cooling tower, etc.

Features
Multiple point level switches in single level switch.
Employing to power actuate the reed switch requires no power
These float level switches are more cost effective than other level switches in terms of multiple points.
The housing protection is at least IP65.
The reed switch and lead wire are isolated with liquids absolutely.

Product Details:

Application The Waterpilot FMX167 is a pressure sensor for hydrostatic level measurement. Three versions of FMX167 are available at Endress+Hauser: • FMX167 with a stainless steel housing, outer diameter of 22 mm (0.87 in): Standard version suitable for drinking water applications and for use in bore holes and wells with small diameters • FMX167 with a stainless steel housing, outer diameter of 42 mm (1.65 in): Heavy duty version, easy clean flush-mounted process diaphragm. Ideally suited to wastewater and sewage treatment plants • FMX167 with plastic insulation, outer diameter of 29 mm (1.14 in): Corrosion resistant version generally for use in saltwater, particularly for ship ballast water tanks. Your benefits • High mechanical resistance to overload and aggressive media • High-precision, robust ceramic measuring cell with long-term stability • Climate proofed sensor thanks to completely potted electronics and 2-filter pressure compensation system • 4 to 20 mA output signal with integrated overvoltage protection • Simultaneous measurement of level and temperature with optionally integrated Pt100 temperature sensor • Usage in drinking water: KTW, NSF, ACS • Approvals: ATEX, FM and CSA • Marine certificate: GL, ABS • Extensive range of accessories provides complete measuring point solutions

Product Details:

RF admittance level transmitter that continuously measures the changing level of a powder, granular or liquid material within a containment vessel. The RF admittance level transmitter measures the changing capacitance between the sensing probe and the reference ground (reference probe or metal wall of the vessel) to determine the level of the material in the vessel.

• 4-20mA output, 2-wire loop powered
• Range up to 200pf
• Simple 2 point calibration
• HART communications is optional
• Liquid, slurry and bulk solid level measurement
• Rod, cable, high temperature, corrosion-resistant units available
• Unaffected by temperature, pressure and other factors

Product Details:

Side mount level switches are designed for use in tanks and vessels for indicating or controlling the level of a liquid.
They work well as high or low level controls. Its operating principal is magnetic & wetted part construction in SS.
When the float magnet moves close to the switch stem, the float magnet repels the switch magnet which either opens or closes the Electrical circuit. The contact can be used to operate a pump or any device connected in series to it. These switches can either be supplied in weather proof cast aluminium switch housing.

 

Application
Water, Condensate Water, Juice, Chemical, Beverages, etc.

Features
Rugged, Economical point level sensing.
Low & high temp.
Easy installation & operation
SS wetted part

Product Details:

Product Specification Product DescriptionTo cater the variegated needs of our esteemed customers, we are highly engaged in offering a wide array of Displacer Type Level Switch.

Product Description:

• The provided switch is manufactured under the supervision of our deft professionals using optimal quality components and innovative techniques. This switch find its application in surging liquids, paints, heavy oils, sewage handling and agitated fluids. Further, we are offering this Displacer Type Magnetic Level Switch in different specifications at nominal prices.
• Techtrol Displacer Type Magnetic Level Switch DS

Features:

• Adjustable
• Easy installation
• Highly durable
• Excellent performance

Product Details:

Description

The MagWave is a level measurement system which combines a highly visible magnetic level indication with an output from a Guided Wave Radar Transmitter. The MagWave features two separate close-coupled chambers for the level indicator float and the Guided Wave Radar antenna. Using single probe radar transmitters in the standard 1-1/2 inch chamber provides the measurement capabilities of coaxial style probes without the potential for fouling due to buildup. The separate float chamber allows the float to travel unobstructed throughout the range of measurement. Redundant level control can be achieved by adding a magnetostrictive transmitter or switches to the float chamber. FEATURES: Highly Visible Level Indication Single Probe Guided Wave Radar Transmitters (No need for coaxial probes) Compact Close-Coupled Chambers Separate Chambers Provide Unobstructed Float Travel Extruded Outlets and Smaller Chamber Sizes Precision Fabricated Floats Temperature Range -60 F to 800 F (-51 C to 427 C) Pressures to 3000 psi (207 bar) Additional Transmitters And Switches May Be Added for Redundant Measurement Optional Vent, Drain, and Isolation Valves Insulation for High and Low Temperature Applications.

Product Details:

The VEGAPULS 63 is a radar sensor for continuous level measurement of aggressive liquids or with hygienic requirements. It is suitable for applications in storage tanks, process vessels, dosing vessels and reactors. The encapsulated antenna system of VEGAPULS 63 protects the VEGAPULS 63 against pollution and ensures a maintenance-free permanent operation. The front-flush mounting ensures an optimum cleanability even with high hygienic requirements.Your benefit

• Exact measuring results independent of process conditions
• High plant availability, because wear and maintenance-free
• Maintenance-free operation through non-contact measuring principle