water Analytical Instrument

Product Details:

Digital conductivity meter has functions of automatic temperature compensation, automatic alarm for upper and lower limits, isolated analog signal output 4-20mA, RS485 remote communication, power-down memory, etc. Conductivity meter adopts anti-static metal paint, sealed waterproof back cover and sealed waterproof joints can improve anti-interference ability, anti-corrosion ability and stability. Online conductivity meter and matched 4 conductivity electrodes have measuring range from 0.02μS/cm~0.02mS/cm to 0.02mS/cm~20mS/cm, can be used for online conductivity monitoring of different liquids such as pure water, tap water, sewage, and concentrated liquid.

Product Details:

industrial pH meter is our latest generation of microprocessor-based instrument, with English display, menu operation, a high intelligent, multi-function, high measurement performance, environmental adaptability and other characteristics. It is a highly intelligent online continuous monitoring instrument, integrate with the sensor and the second meter. Can be equipped with three composite or two composite electrodes to meet a variety of sites. Can be widely used for continuous monitoring of PH value for thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and water and other solution.

Features:

New design, Aluminium shell, Metal textureIntelligent: This industrial PH meter adopts high-precision AD conversion and single chip microcomputerprocessing technologies and can be used for the measurement of the PH values and temperature, automatic temperature compensation and self-checking.Reliability: All the components are arranged on one circuit board. No complicated functional switch, adjustingknob or potentiometer arranged on this instrument.Double high impedance input: The latest components are adopted; The impedance of the double high impedanceinput can reach as high as l012Ω. It has strong interference immunity.Solution grounding: This can eliminate all the disturbance of the ground circuit.Isolated current output: Optoelectronic isolating technology is adopted. This meter has strong interferenceimmunity and the capacity of long-distance transmission. Communication interface: it can be easily connected to a computer to perform monitoring and communication.Automatic temperature compensation: It performs automatic temperature compensation when the temperature iswithin the range of 0~99.9ºC.Water proof and dust-proof design: Its protection grade is IP54. It is applicable for outdoor use.Display, menu and notepad: It adopts menu operation, which is like that in a computer. It can be easilyoperated only according to the prompts and without guidance of the operation manual.

Product Details:

the power of advanced digital communications in a simple, flexible design, enabling you to get up and running quickly.

• 'Easy Setup' sensor configuration menus provide step-by-step guidance

• Advanced self-diagnostics conforming to NAMUR NE 107 provide harmonized indication of device status

• Multi-level security access prevents unauthorized modifications to transmitter configuration and calibration

• One-Button sensor calibration saves time and money spent on routine maintenance

• Common universal design for pH, ORP or conductivity measurement

• Plug-and-play sensor and communication modules minimize stock holding and maximize operation uptime available with PROFIBUS™ PA, FOUNDATION™ Fieldbus™ or HART™ communications

Product Details:

eagentless Free Chlorine Analyzer: The ECD FC80 Free Chlorine Analyzer is a panel mounted, ready to use Free Chlorine Analyzer. It is designed to monitor free chlorine (residual chlorine) in drinking water, industrial cooling and rinse water, wastewater or other fresh water samples containing chlorine in the range of 0.05-20 ppm Cl2 (High Range) or 0.01 to 5.00 Cl2 (Low Range). The FC80 Free Chlorine Analyzer features a plug and play design that incorporates a flow control device, a pH sensor, a chlorine sensor and the T80 transmitter are conveniently mounted on a PVC panel. Connect the sample and drain lines, connect the power and outputs and it is ready to use. The FC80 Free Chlorine Analyzer is calibrated at the factory before shipment, additional Calibrations are accomplished by DPD comparison.

Key Features include:

1. No Reagents Required: the FC80 Free Chlorine Analyzer sensor technology and automatic pH compensation is a reagentless design and keep the cost of ownership low without having expensive reagents.

2. Compliant with EPA Method 334.0

3. Automatic Flow Control and Large Flow Tubes and Cells: greatly reduces clogs and blockages of the analyzer which is a common problem in other free chlorine analyzers and allows for easy cleaning.

4. Panel Mounted System Plumb and Play Design: the Free Chlorine Analyzer comes complete and is easy to install and ready to use.

5. T80 Analyzer Capability: TDual Masurements (2) 4 to 20 mA output, MODBUS and/or HART communication, (3) Alarm Relays, 24 VDC or 110/220 AC Power.

6. Auto Cleaning Option: The FC80 Free Chlorine Analyzer can be ordered with an auto cleaning option to keep the chlorine clean from comtaminates for an extended period of time.

Product Details:

Specifications

E. Conductivity controller
Applications
• deionized water
• drinking water
• food industry
• surface treatment
Selectable input from:
• 2 electrodes
• 4 electrodes pre-amplified cell
• electrodeless pre-amplified cell
Scales: from 0.2 mS to 40 Siemens
Autoranging
Conversion in % - gr/l - Bè
Temperature readout
Dual filter software
Calibration parameters display
Dual set-point and alarm conditions display
Automatic or manual temperature compensation
Automatic or manual acquisition of the temperature compensation
table
Isolated output:
• 0/20 mA or 4/20 mA selectable
• programmable input on the span
Automatic or manual operation
Dual Set-point with hysteresis, delay, and min/max
programmable functions
Alarm:
• continuous/flashing
• min/max and delay programmable
• on Set-points timing
Automatic overload protection and reset
Extractable terminal block
96x96 (1/4 DIN) housing
Accessories
The controller can be used with all B&C Electronics conductivity
cells, including the 4-electrodes and toroidal amplified probes

Product Details:

The 1056 dual-input transmitter offers single or dual sensor input with an unrestricted choice of dual measurements thus reducing the cost per loop and saving panel space. This multi-parameter instrument offers a wide range of measurement choices, including differential conductivity, dual oxygen and many other combinations supporting most industrial, commercial, and municipal applications. The modular design of the instrument allows signal input boards to be field replaced making configuration changes easy

SpecificationsEnclosure RatingPolycarbonate. Type 4X, IP65.Certifications/ApprovalsFM/CSA/UL (see full specifications for complete list of certifications)DimensionsOverall 155 x 155 x 131mm (6.10 x 6.10 x 5.15 in.). Cutout: 1/2 DIN 139mm x 139mm (5.45 x 5.45 in.)Weight3 lbs/4 lbs (1.5 kg/2.0 kg)

Features

• Faster installation using Quick Start programming, auto-recognition of sensor boards and modular design
• At a glance view of pertinent information provided by the large customizable display
• Visibility of process parameters by utilizing HART or Profibus DP digital communications
• Effortlessly connect with PLCs and DCS’ by choosing the HART or Profibus DP communication options

Product Details:

Technical specifications Inputs: potentiostatic sensors polarographic membraned sensors pH electrodes (glass/antimony) ORP Pt100 / Pt1000 Zero: ± 20%, ± 5.0 °C, ± 9°F Sensitivity: 12.5 ÷ 250 % Resolution: 1 digit Accuracy: 0.2 % Repeatability: 0.1 % Non linearity: 0.1 % Dual filter software: 0.4 ÷ 50.0 seconds for small and large variations Dual analog output: 0-20 mA / 4-20 mA Rmax 600 Ω Digital output: RS485 isolated, protocol B&C ASCII and MODBUS (function 03) Dual set point HI/LO: ON/OFF - PFM – PWM, relay SPST Hysteresis: 0 ÷ 10 % Delay: 0 ÷ 100.0 seconds Alarm: SPDT relay with delay 0 ÷ 100.0 seconds Cleaning function: off / autoclean / manual, relay SPDT repetition time 0.1 ÷ 100.0 hours cleaning time 1.0 ÷ 60.0 seconds holding time 0.0 ÷20.0 minutes SPST and SPDT relay contacts: 220V - 5 A resistive load Operating temperature: -10 ÷ 60 °C Humidity: 95% without condensation Power supply: 85 ÷ 264Vac - 50/60 Hz 9 ÷ 36Vdc, 12 ÷ 24Vac (option 091.42x) Terminal blocks: removable Weight: 1360 g Enclosure: ABS, IP 65 protection Dimensions: 256x230x89 mm

Product Details:

• Selectable scales in mg/l – % of air
• Temperature readout by means of Pt100 or Pt1000
• Dissolved oxygen range: 0/19,99 mg/l- 0/199,9 % of air saturation
• Temperature range:  0/100,0 °C or 32/212 °F

• Automatic or manual temperature compensation
• Pressure, salinity and relative humidity compensation
• Oxygen solubility table stored into the microcomputer
• Set-point and alarm conditions display
• Analog output: 0-20 or 4-20 mA isolated
• 2 set-point with min/max function and delay time programmable
• Min/max alarm relay.
• Logical input for hold or alarm function

• Power supply: 85/264 Vac
• Dimensions: 96x96x95 mm