Pressure Transmitter

Product Details:

We Nilkanth Enterprise offeres smart pressure transmitter is for Reptitude make  universal industrial application for gauge, absolute measured with ideal solution for different range measurement, adopts advanced diffusion silicon sensor as sensitive components, digital and stable circuit, precise temperature compensation, excellent sealing and assembly to guarantee the high quality and stability, widely used in various pressure measured industry.

Feature

• High accuracy and stability: ±0.1% , ±0.2%
• Gauge, absolute pressure measured
• Range: 0Kpa to 100Mpa
• Process Temperature:T1:-20 to 80degC
• High temperature accessory: T2 0 to 200degC T3:0 to 300degC
• 4-20mA, 2 wire ,RS485, 4-20ma+RS485 output
• Zero and fulll range can be set flexibly with local display
• Programmable range via front key with local Display
• With anti- lightning, anti-RF interference
• Digital electrical board, water-proof, dust-proof, anti-interference With reversed polarity protection and instantaneous over current and over cross-voltage protection
• 316L stainless steel diaphragm, stainless steel material suitable for various complicated environment.

Specification

Product Details:

NILKANTH ENTERPRISE offerres a ABBB make Differential pressure Transmitter .

Data

266DSH: smartness beyond performances.

- Base accuracy : from ±0.06% 
- Span limits: 0.05 to 16000kPa; 0.2 ... 2320 psi
- Multiple protocol availability – provides integration with HART®, PROFIBUS PA and FOUNDATION Fieldbus platforms offering interchangeability and transmitter upgrade capabilities 
- Full compliance with PED Category III 

Product Details:

Nilkanth Enterprise offered Smart Differential pressure Transmitter .

Smart Differential Pressure Transmitter is microprocessor-based measuring instrument. With advanced microprocessor technology-enabled temperature and nonlinear compensation, EST4300 Smart Differential Pressure Transmitter features higher measurement accuracy, better temperature characteristic, and stability and reliability. EST4300 DP, which is compatible with HART 475 field communicator, is used to measure the level, density, and pressure of liquid, gas, and steam, convert it to 4-20mAdc current signal outputs.

Features

• High level stability and precision
• Excellet overload capacity
• Enhanced self-diagnostic capacity
• Independent Zero & Span Adjustment
• Rugged construction for shock resistance
• Digital compensation technology compensating for temperature and static pressure
• No mechanical transmission parts, less maintenance to minimize downtime
• Perfect local and remote set-up and calibration function

Product Details:

Nilkanth Enterprise Offeres Honeywe make Differential pressure transmitter .
Part of the SmartLine® family of products, the STG800 and STG80L are high performance gauge pressure transmitter featuring piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and temperatures. The SmartLine family is also fully tested and compliant with Experion® PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding application needs for pressure measurement applications. 

Product Details:

Nilkanth Enterprises Offered a Diaphragm flange type pressure transmitter .

• Pressure type : G = Gage

• Pressure range : 3 = –14.7 to 800 psi (–1,01 to 55,15 bar)

• Transmitter output : A = 4–20 mA with digital signal based on HART® Protocol

• Process connection style : 2B = ½–14 NPT female (range 1–5 only)

• Isolating diaphragm : 2 = 316L SST, Process connection wetted parts material 316L SST.

• Sensor fill fluid : 1 = Silicone

• Housing material : J = SST, ½–14 NPT Conduit entry size

• Mounting bracket : B4 = Bracket for 2-in. pipe or panel mounting, all SST

• Product certifications : E7 = IECEx Flameproof, Dust Ignition-proof

• Display and interface options : M5 = LCD display

• Calibration certification : Q4 = Calibration certificate

• Material traceability certification : Q8 = Material traceability certification per EN 10204 3.1

• Diaphragm seal assemblies : S1 = Assemble to one Rosemount 1199 seal

• HART revision configuration (requires HART Protocol output code A) : HR5 = Configured for HART Revision 5

• Weight : 2 Kg

• 1199 Diaphragm Seals

• Seal Location : W = Seal on High Pressure Side of Transmitter, Repairable-Welded Connection Type, All Transmitters

• General Purpose Fill Fluids : D = D.C. 200,–45 to 205 °C (–49 to 401 °F) Temperature Limits, 0.93 Specific Gravity

• Capillary Seal Connection Inside Diameter inches (mm) : D = 0.075 (1.91), SST Armored Sleeving material

• Capillary Connection Length : 10 = 10 ft (3.0 m)

• Industry Standard : A = ANSI / ASME B16.5 (American National Standards Institute / American Society of Mechanical Engineers)

• Process Connection Style : RFW = Flanged

• Process Connection Size : 2 = 1-in ANSI , 25A JIS

• Flange Pressure Rating : 4 = Class 600 ANSI, 40K JIS

• Diaphragm Material : DA = 316L SST, 316 SST Upper Housing Material, 316 SST Mounting Flange Material

• Flushing Connection Ring Material (Lower Housing) : A = 316L SST

• Flushing Options : 7 = One 1 /2-in. Flushing Connection

• Options : G = SST Plug In Flushing Connection

Product Details:

Calibrating a 3051 transmitter may include the following procedures: • Rerange: Sets the 4 and 20 mA points at required pressures. • Sensor Trim: Adjusts the position of the factory sensor characterization curve to optimize performance over a specified pressure range, or to adjust for mounting effects. • Analog Output Trim: Adjusts the analog output to match the plant standard or the control loop. The 3051 sensor module uses a microprocessor that contains information about the sensor’s specific characteristics in response to pressure and temperature inputs. A smart transmitter compensates for these sensor variations. The process of generating the sensor performance profile is called factory characterization. Factory sensor characterization also provides the ability to readjust the 4 and 20 mA points without applying pressure to the transmitter. Trim and rerange functions also differ. Reranging sets analog output to the selected upper and lower range points and can be done with or without an applied pressure. Reranging does not change the factory sensor characterization curve stored in the microprocessor. Sensor trimming requires an accurate pressure input and adds additional compensation that adjusts the position of the factory sensor characterization curve to optimize performance over a specific pressure range.

Product Details:

EJA110E features include:

• 0.055% Accuracy (0.04% Accuracy optional)
• 0.1% Stability per 10 years
• 90 ms Response Time
• Exida and TUV SIL 2 / SIL3 Certified
• MWP 2,300 psi (MWP 3,600 psi option)
• Local Parameter Setting (LPS)

Product Details:

Description:
The 3051 Series SMART® Transmitters are offered in a variety of configurations for differential, gauge, liquid-level, flow and specific gravity measurement applications.
 
The 3051C smart pressure transmitter combines advanced technology with the versatile Coplanar ™ process connection to create a new standard in pressure measurement technology. Even under the most demanding conditions, the performance specifications of the 3051C smart pressure transmitter provide unmatched long-term stability and reliability.
 
The 3051C smart pressure transmitter is capable of differential, gage, or absolute pressure measurement. Utilizing advanced capacitance sensor technology (piezoresistive sensors for absolute pressure models) the 3051C smart pressure transmitter is accurate up to ±0.04% resulting in total operating performance, the true measure of "real-world" transmitter performance, of ±0.15%. Additionally, the 3051C smart pressure transmitter has an installed five-year stability of ±0.125% demonstrating the ability to maintain performance over a five year period under the most demanding process conditions. The high accuracy and stability of the 3051C equates to reduced variability, lower operating and maintenance costs, and improved plant safety.
 
The 3051C smart pressure transmitter can utilize either traditional flanges or versatile Coplanar ™ platform designed to enable the best process connection for pressure, flow, and level applications. Right out of the box, the solution arrives factory calibrated, pressure-tested, and ready to install. The 3051C smart pressure transmitter is also available in a number of materials and a wide range of hazardous area certifications are available.
 
Output options available to the 3051C smart pressure transmitter include 4-20mA or 1-5VDC with HART protocol, Profibus, or FOUNDATION fieldbus. The 3051C smart pressure transmitter offers so many options that it can be configured for any application.

Product Details:

• Measuring principle

  Ultrasonic

• Characteristic / Application

  Compact ultrasonic transmitter

• Supply / Communication

  2-wire HART

• Accuracy

  +/- 2 mm or +/- 0,2 % of set measuring range

• Ambient temperature

  -40 °C ... 80 °C
  (-40 °F ... 176 °F)

• Process temperature

  -40 °C ... 80 °C
  (-40 °F ... 176 °F)

• Process pressure / max. overpressure limit

  0.7 bar ... 3 bar abs
  (10 psi ... 44 psi)

• Main wetted parts

  PVDF

• Process connection

  G / NPT 2"

• Blocking distance

  0.35 m (1.15 ft)

• Max. measurement distance

  Liquids: 8 m (26 ft),
  Solids: 3.5 m (11 ft)

• Communication

  4...20 mA HART

• Certificates / Approvals

  ATEX, FM, CSA, TIIS, INMETRO, NEPSI

Product Details:

Product Details:

The EJA530E is our in-line mount gauge pressure transmitter in the series.

EJA530E's features include:

• Accurately: ±0.055% Accuracy
• Reliably: ±0.1% Stability per 10 years
• Quickly: 90 msec Response Time

Explore how the EJA530E can help you Boost your bottom line.